AURATON 2005 Bedienungsanleitung PDF herunterladen (Seite 5)

LCD

1) Day of the week Indicator

2) Time

3) Temperature

4) Program Number

5) Program Profile Indicator

6) Manual Override Indicator

7) Output-On Indicator and

temperature Mode Indicator

8) Low Battery Indicator

Note:

A. The output-on indicator will be displayed if the output is on. It will disappear if the output is off.

B. The low battery indicator will be displayed if the voltage of the batteries drop to a certain level. Please

change the batteries as soon as possible.

Start.

The thermostat is operated by two LR6 alkaline batteries. Please remove the front cover and install two

new batteries. When the batteries are installed, the thermostat should be operating and you can see the LCD

active. If the thermostat does not work properly, please check the batteries for wrong polarities and press the

reset button by a ball-point pen.

The LCD after start or reset.

Note:

A. Temperature may not be 22.25°C as the diagram

shown and the Output-On indicator may active after a

few seconds, depend on different situations.

B. Do not use a pencil to push the reset button. The

graphite residue of a pencil can cause short circuit

and damage the thermostat.

Set day/time.

To set day, press d button. Similarly, press h button to set hour and m button to set minute.

Example: When start or after reset, the time is 00:00, Sunday. To set the clock to current time (e.g., 11:23,

Tuesday), press d 2 times, h 11 times and m 23 times.

Note: When you press and hold the keys for 2 seconds the day/time will change rapidly. Release when the

desired setting comes.

1 2 3 4 5 6 7 8 9 10 11

Keine Kommentare

AURATON 2005 Bedienungsanleitung Seite 5